Toyota Tundra Door Lock Relay Location That Most Mix Up!

Where is the door lock relay on Toyota Tundra? The door lock relay on the Toyota Tundra is located in the dashboard, on the passenger side. It is a box with a label that says Door Lock Relay.

To fix the door lock problems in Toyota Tundra, you need to remove the door panel and locate the problem.

The following guide will show you how to access and replace the door lock relay in your vehicle. Follow our instructions, use the right parts, and enjoy your car again.

Find the Toyota Tundra Door Lock Relay Location

The door lock relay on your Toyota Tundra is located in the fuse box. The fuse box is usually located on the passenger side dashboard. The door lock relay will be labeled with “LOCK” or “Door Lock.” Here is the step-by-step process that would work to find 2006, 2011, 2010, and 2012 Toyota Tundra door lock relay locations and other models you might own.

Step 1: Open The Hood

The first step to finding the door lock relay on your Toyota Tundra is to open the dashboard. Once you have the dashboard open, locate the fuse box. The fuse box will be on there.

Step 2: Check Fuses

The Toyota Tundra has a door lock relay that is located in the fuse box. This relay controls the power to the door lock actuators. If this relay fails, the door locks will not work. You can check the fuses by looking at the diagram on the inside of the fuse box cover.

Step 3: Find Toyota Tundra Relays

Once you have located the fuse box, look for a diagram on the inside cover or the back of the box. This will help you identify which relay controls the door locks. The relay should be labeled with RL and the corresponding number. In most cases, it will be either RL1 or RL2. If there is no diagram, gently remove each relay one at a time and hold it up to the light.

Tips: If you can’t find the door lock relay, look at your Tundra’s owner’s manual for more information.

Also, check where is the Porsche Panamera battery location for various models.

Step 4: Remove and Replace Relays

1. Using a small flathead screwdriver, remove the two relays from the relay box.

2. Take note of which relay goes in which spot, as they are not interchangeable.

3. Replace the old relays with new ones, making sure they are seated correctly in the relay box.

4. Once the new relays are in place, replace the cover on the relay box and screw it back into place.

Safety Tips

  1. Always ensure that your Toyota Tundra is parked in a safe and secure location before attempting to change the door lock relay.
  2. It is advisable to have a friend or family member with you when changing the door lock relay in case you need assistance.
  3. Make sure that you have all the necessary tools and supplies before starting the job.
  4. Take your time and be careful when working on your Toyota Tundra.

Frequently Asked Questions (FAQs)

Is there a fuse for power door locks?

Yes, there is a fuse for power door locks on the Toyota Tundra. The fuse is located in the passenger side dashboard. To access it, you’ll need to remove the cover of the fuse box. Once you’ve done that, you should see a diagram that indicates which fuse corresponds to the power door locks.

What does a door lock relay do?

A door lock relay is a device that helps to control the locking and unlocking of your car doors. It is usually located near the door lock cylinder and works by receiving a signal from the keyless entry system or remote. The door lock relay then sends a signal to the actuator, which controls the locking mechanism.

What does integration relay do?

The integration relay is responsible for controlling the door lock and unlock functions of your Toyota Tundra. When you press the door lock or unlock button on your key fob, the signal is sent to the integration relay, which then activates the corresponding door lock or unlocks all doors. If the integration relay fails, your Toyota Tundra will be unable to lock or unlock its doors.

Last Words

It is not so hard to find out the Toyota Tundra door lock relay location. It is located in the fuse box. Hopefully, this guide has shown you where to find it and how to replace it if necessary. Thanks for reading, and feel free to leave a comment if you have any questions

You Can Also Read:

Similar Posts