Why the lights don’t flash when locking car Dodge The lights don’t blink when locking a car Dodge because of howay the car’s electrical system is designed. When the vehicle is locked, the electrical current is cut off to the lights.
In this article, we’ll explore why the lights don’t flash on a Dodge car when locked and what you can do to make them explode if you want.
Lights Don’t Flash When Locking Car Dodge
A few common reasons can make your car’s lights fail to flash when you lock the doors. One possibility is that the light bulb itself has blown out. Another cause is a problem with the electrical connection between the door and the light. It is also possible that the door switch itself is not working correctly.
|The light bulb is blown out||Replace the bulb|
|Loose wire||Tighten or replace|
|Bad relay||Replace it|
|Low battery level||Examine the battery, and if necessary, replace it.|
|Fuse is blown||Check the fuse and replace|
|Locking mechanism itself||Check the locking mechanism|
|The vehicle is in either neutral or park||Putting it in opposite ways.|
|Doors are not fully closed||Make sure all doors are fully closed|
|The car is already locked||Unlock the car and then try locking it again|
|Unset alarm||Check the wires to ensure they are all properly connected.|
|Shutdown toggle||Turn the toggle on|
|Lock Button hang||Check settings|
|Malfunctioning BCM||Replace a BCM with a new one|
|Defective door lock actuator||Swapping out the actuator|
|An issue in EVIC settings||Try to resetting|
Now we will discuss each problem and solution in detail.
Light Bulb Blown Out
If you have a Dodge car with an automatic locking system, you may have noticed that the lights are not flashing when locking/unlocking car Dodge. This is because the light bulb is used to indicate that locked doors are burned out. However, replacing the light bulb is a simple fix that you can do in just a few minutes.
Fuse Is Blown
The lights don’t flash when locking Dodge Challenger doors because of a blown fuse. The fuse responsible for this function is located in the fuse box under the hood. To change the fuse, take out the old one and put in a new one with the same amount of amperage. Consult the owner’s manual of your vehicle if you are unsure of the size of the fuse to use.
Once the new fuse is in place, the lights should flash when you lock the doors. If they don’t, there may be another issue with the electrical system.
Issue In EVIC Settings
If your car’s lights don’t flash when you lock the doors, it could be a problem with the EVIC settings. To fix this, you’ll need to adjust the EVIC settings so that the lights will flash when you lock the doors. Here’s how to do it:
At first, open the EVIC settings menu. If there is no touchscreen option, you can try resetting the system. You must scroll down to the “Lights” setting to reset it. Afterward, change the location from “Off” to “On.” Next, save your changes and exit the menu. When you lock your car doors, the lights should flash as normal. If they don’t, another issue may be at play, and you’ll need to troubleshoot further.
If none of these alternatives are effective, you may need to purchase a new touchscreen.
One possible reason the lights don’t flash when unlocking Dodge Charger is that the relay is bad. The relay is responsible for sending a signal to the lights, so if it’s not working correctly, the lights won’t turn on.
The solution is to replace it. However, several reasons could be causing this issue, so it’s essential to troubleshoot before replacing any parts.
Loose wire In Door Lock System
Suppose your lights are not flashing when locking/unlocking car Dodge doors; it could be due to a loose wire. This can cause problems for users, such as not being able to see the car’s lights in the dark or having to unlock the doors manually. If the wires are loose or damaged, they might not be able to carry the signal from the relay to the lights.
To fix this problem, you’ll need to check the wiring and replace the relay if necessary.
Car Is In Either Neutral Or Parked
When you lock your car with the remote, the lights should flash to indicate the vehicle is locked. However, sometimes they don’t sparkle. This can be because the vehicle is in neutral or park, and thus the locking mechanism is not engaged. The solution is simply putting the car in drive or reverse before locking it. This will ensure that the locking mechanism is engaged, and the lights will flash when you lock the car.
The Car Is Already Locked
The lights on a Dodge car do not flash when the vehicle is locked because the car is already locked. In order to fix this issue, you will need to unlock the automobile and lock it again. This will cause the lights to flash, indicating that the car is now closed.
If the lights don’t flash when locking Dodge Challenger doors, it could be because the light switch is off. Simply turning on the lightbulb should be enough to rectify this situation and put an end to the issue. If the behavior continues, it could indicate a more significant problem with your vehicle’s electrical power system. In this case, it is best to take the car to a mechanic or dealership for further diagnosis.
Lock Button Hang
If you have a Dodge car, you may have noticed that the lights don’t flash when you lock the car. This is due to a problem with the button that locks the door. When you press the lock button, it doesn’t properly engage the locking mechanism, so the lights don’t flash. This can be frustrating for drivers, primarily if they are used to their cars locking automatically when they press the button.
Fortunately, there is a solution to this dilemma. It’s a simple matter of purchasing a replacement lock button. This will ensure that your car locks appropriately, and the lights will flash when you press the button.
Doors Are Not Fully Closed
If you find that the lights don’t flash when locking Dodge Challenger doors, it’s likely because the car doors are not fully closed. If you are going to park in a dark environment or want to ensure that your car is safe, this could be a challenge. You have a few options for resolving this.
First, check to see that all the doors on your vehicle are securely shut. If the problem persists, check to see if the doors are closed all the way. For the gate to wholly shut, you might need to make some adjustments to it.
Low Battery Level
However, check the battery in your remote key fob if you find out your car’s door is okay. If the battery is dead, it could prevent the signal from reaching the vehicle and cause the lights not to flash. Sometimes we do not give importance to low batteries, but this is why lights are not flashing when locking/unlocking car Dodge.
It’s possible that the alarm isn’t working correctly. The indicator will not blink if there is no alert configured for it to respond to. To avoid draining the battery, this is the best option. Additionally, it can potentially disrupt the mechanism that locks the door. If the issue persists, you can try turning off the alarm to see if it helps.
The BCM in a Dodge Charger regulates how the vehicle’s lights work. Dodge Challengers with faulty body control modules are not uncommon. This may prevent the lights are not flashing when locking/unlocking car Dodge. The only way to fix it is to get a new BCM.
Suppose the lights are not flashing when locking/unlocking car Dodge; it’s probably because the door lock actuator isn’t working properly. It’s possible that swapping out the actuator will fix the problem. A large percentage of auto parts retailers carry replaceable actuators. Before you install the replacement actuator, you need to make sure it is compatible with the model of your Dodge vehicle.
Locking Mechanism Itself
If none of these solutions work, you may need to take your car to a dealer or mechanic to have it checked out. The locking mechanism can have an issue that must be rectified as soon as possible.
Hopefully, you can figure out what the causes are working behind the issue.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
What are the lock/unlock feedback lights?
Lock/unlock feedback lights are indicators that show whether a door is locked or unlocked. They can be found on the interior and exterior doors, usually consisting of a green light for an unlocked door and a red light for a locked door. In some cases, there may also be a yellow light that indicates that the door is part-way locked. In addition to providing a visual indication of the door’s status, lock/unlock feedback lights can also be used as part of a security system.
Why don’t my lights blink when I lock my car?
There are several reasons your car’s lights may not blink when you lock it. The first possibility is that this feature is unavailable on your particular vehicle because it was not manufactured with it. Some vehicles have a built-in mechanism that will cause the lights to blink when locked doors, but not all cars have this feature. If your vehicle does not feature such, there is no way to add it. The second reason your car’s lights may not blink is if the feature may get turned off. Many cars have an option to turn off the light-blinking feature so that it may be just turned off in your car.
Why is my car alarm not working?
There are several potential causes for a non-functioning automobile alarm. Most of the time, it’s because the battery dies or is not strong enough to run the alarm. Unplugged cables are another option. Last but not least, the alarm could be faulty in some way. You can attempt replacing the battery if you believe it is the issue’s source. If that does not work, check the wires to ensure they are all properly connected. If you still cannot get the alarm to work, you must consult a professional.
If you are in a situation where your lights don’t flash when locking car Dodge, don’t panic. There are several things you can do here to troubleshoot the problem and get back on the road. The essential thing you can do is to keep a level head and think carefully about your alternatives. Hopefully, one of these solutions will surely help your car’s locks work correctly again.
We have shown all possible problems you can face when locking a Dodge, and lights may not flash. Get assistance from a trained expert if you cannot make the necessary repairs on your own.
You Can Also Read:
- What To Do When Your Dodge Ram Interior Lights Won’t Turn On
- 7 Reasons Why Dodge Ram Oil Pressure Drops When Braking?
- Dodge Charger Cranks But Wont Start – What Are The Reasons?
- Dodge Charger Trunk Won’t Open: Why And How To Fix It
- Dodge Charger PCM Problems: 5 Problems You Might Encounter
Okolo is a mechanical engineer and a full-time employer in a renowned vehicle parts manufacturing company. Apart from her job, she likes to play with words. And whenever she gets time, she writes for us and shares her experience by adding value to car parts-related topics. Okolo is also a good cook sidestepping her engineering life.