How To Reset Service Airbag Light On Suburban W/O Using Tool?
How to reset service airbag light on Suburban? You can reset it by turning the ignition key off and turning it back on.
If your service airbag light is on in your Suburban, don’t panic! Fixing this issue won’t take too much time at all.
Service airbag light is on in your car means that something is wrong with it. But in some cases, changing other parts can make this light pop up on your dash. In such a case, resetting it works only.
So, in this piece, we’ll walk you through the process of resetting the service airbag light issue in your car. Read on to discover how to do things step-by-step.
How To Reset Service Airbag Light On Suburban
The airbag light is commonly seen on the dashboard of many cars. Most of the time, it comes on due to an issue with the car’s airbag module. It can be caused by a faulty sensor, a loose connection, or even a disconnected wire.
If your Suburban has an airbag light illuminated on the instrument panel, there is a problem with the airbag system, and it needs to reset. There are a few different ways to reset the airbag light, depending on the year and model of your vehicle. You will need a unique tool to reset the airbag system, such as a scan tool or code reader.
Reset Service Airbag Light Without Tool
To reset the airbag light on your Suburban, follow these steps:
Step 1: At first, separate the connection to the negatively charged electrode. Then, wait at least 3 minutes.
Step 2: Afterward, reconnect the negative battery cable.
Step 3: Then, switch the ignition system to the ON position and start the vehicle.
Step 4: Open the driver’s door and wait for the airbag light to go off.
Step 5: Afterward, close the driver’s door and wait for the airbag light to return.
Step 6: After that, hold down the icon for 5 seconds to return to the home screen.
Step 7: Then pause for 10 seconds while turning the starter key back to the OFF state.
Step 8: Finally, turn the ignition key to the ON position and check that the airbag light is no longer illuminated.
Remember that if you face any difficulties, you can contact your Suburban certified repair shop, they will have the proper equipment to reset the light for you. They will also be able to test the airbag system to ensure it is functioning correctly.
Reset Service Airbag Light Using Tool
You must purchase a reset tool if you choose to do it yourself. The majority of auto parts retailers carry this component. You may easily reconfigure the airbag mechanism using a detector or code scanner, whether you have one. Once you have the reset tool, follow the instructions that come with it to reset the light.
Step 1: Make the connection between the scanning tool or code reader and the diagnostic port located beneath the dashboard.
Step 2: Follow the scan tool or code reader prompts to clear the airbag codes.
Step 3: Disconnect the diagnostic port’s scan tool or code reader.
Step 4: Initiate the vehicle’s ignition and make sure the “Airbag” indicator light is not on once you do so.
However, you can usually find these scanners at your local auto parts store. Resetting the light is easy if you refer to the owner’s instructions. It should come with detailed directions on carrying out the task. If you can’t find the manual, you can always contact your local Chevrolet dealer, who should be able to help you out.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
Can you reset the airbag light without any tool?
Yes, you can reset the airbag light without a tool. However, it is essential to note that this should only be done if there is no issue with the airbag system. If there is an issue with the system, it is best to take the car to a mechanic or dealership to have it checked out. To turn the light back on, take the battery out for a few moments and then put it back in after it has been disconnected. This will reset the light and should turn it off. If the indicator light does not go out, there is probably something wrong with the airbag module that must be considered.
What does it mean when it says service airbag?
The phrase “Service Airbag” is often used to describe a vehicle’s airbag system. This system is designed to deploy in the event of a collision, providing cushioning and protection for the vehicle’s occupants. Airbags are a crucial safety component that can lessen collision casualties. They have the potential even to rescue lives in specific circumstances. When your car’s airbag system is triggered, a small explosive charge is deployed that quickly fills the airbag with gas. This happens within milliseconds of an impact, and the sudden inflation of the airbag can help protect you from serious injuries.
How do you clear an airbag code?
Airbag codes are a common occurrence in today’s vehicles. They are usually stored as a code in the vehicle’s computer system. Most of the time, you can clear the airbag code by disconnecting the battery and reconnecting it. If that doesn’t work, you can try one of these methods: At first, turn on your headlights and turn off your engine. Then, turn your engine off and let it idle for several minutes. Lastly, replace the airbag sensor assembly if you have an aftermarket part installed.
How much does it cost to reset the airbag light?
The average cost to reset an airbag light is between $50 and $200. Nevertheless, the precise cost will change according to the brand and type of automobile you drive. Cars differ from one another as well. The price also depends on how much it costs to replace the airbag and what kind of warranty you have on your vehicle. If you need to have the work done by a professional, expect to pay on the higher end of the scale. Some dealerships may charge as much as $500 or more to reset the light. Many stores that sell auto parts will have the necessary tools and instructions available. You can also uncover a variety of knowledge by searching the internet.
Conclusion
Though it may seem daunting, resetting the service airbag light on your Chevy Suburban is relatively easy. Following the steps outlined in this article, you should be able to get your SUV back to its former glory in no time.
Hopefully, you will be able to reset the service airbag light on your own, don’t hesitate to reach out for help. We will be happy if our article information on how to reset service airbag light on Suburban to assist you with whatever you need. During resetting, you should seek the assistance of a trained specialist if you have any queries or if you stumble into any difficulties. Thanks for reading, and good luck!
You Can Also Read:
- 3 Simple Ways for How To Connect Wireless Headphones To Suburban
- Viper Remote Start Not Working- Checking Battery or Engine?
- Dodge Durango Instrument Cluster Problems- Explore 8 Main Reasons!

Here is our Front-end technician who has worked on hundreds of vehicles of different renowned brands so far. And her 8 years of experiences help her monitor and manage the whole workflow of this website and run the site smoothly. After graduation, she finds her interest in aiding people through her writing offline or online. This interest ignites and inspires her every time to present you with the most effective and secure tips and guides to troubleshoot your car.