How To Change Rear Axle Seal Chevy Silverado 1500? [Be A Pro]

How To Change Rear Axle Seal Chevy Silverado 1500? Using some necessary tools, you can replace it easily yourself.

The steps of the process are quite complex. But do not worry! We are here to tell you the steps in clear words so that you can easily replace the rear axle seal.

This informative article will give you all the essential information with unique tips and tricks. So stay tuned and know the process to change it at home with appropriate tools.

So! We will start with the necessary tools name. And then, we will continue with the steps of the seal-changing process.

How To Change Rear Axle Seal Chevy Silverado 1500?

We will focus on the details but let me tell you why you need to change the seal in short words. The function of the rear axle seal is to provide fuel to the accelerator.

This part of the Chevy Silverado 1500 always remains in touch with the fuel. And the chance of the defect is high.

Suppose your Chevy Silverado’s rear axle seal does not function properly. In that case, it will help if you know how to replace rear axle seal – Chevy.

Besides, you can check the leaking axle seal repair cost for a better idea.

Necessary Tools & Kits

As the process is made with multiple steps, we need various tools for making up the procedure. Tools include;

  1. Jack Stand
  2. Lug Nuts Impact Wrench 
  3. Standard Screwdriver 
  4. Hammer
  5. Slight Hammer
  6. Flat Head Screwdriver
  7. New Seal
  8. Grease
  9. Gear Oil
  10. Wrench 

How To Replace Rear Axle Seals Chevy Silverado

Though the process is lengthy, the method is not so hard to understand. Here we try our best to make you understand the procedure.

We divide the whole procedure into 3 sections. The first one is the preparation phase, and the second one is the formulation phase.

 In the last segment, you will get some beneficial advice, tricks, and tips to do the replacement like a pro avoiding mistakes.

 Section 1: Preparation Phase 

The steps of this section are for making the procedure simple and manageable. But it is very important to maintain the preparation phase.

The section includes two steps. They are;

Raise The Wheel Off The Ground 

Support your truck on the frame with a Jack stand. It will help you get easy access to the rear axle seal board in a suitable position, which is preferable for replacing the seal. 

Make The Car Neutral 

Put the car on neutral. This is the easiest way to rotate the carrier. Make sure you have the key turned off and the battery connection is off.

Section 2: Formulation Phase 

Now we have come into the main segment. After the end of this segment, you will know how to change rear axle seal Chevy Silverado 1500HD

There are 11 steps in the formulation phase. They are;

1. Remove The Wheel

Then withdraw the wheel by removing the nuts with the lug nuts impact wrench. The reason for using an electric wrench is that it saves time by making the work effortless. 

[NOTE] Keep in mind that you have to do this for both wheels.

2. Removing The Calliper

After removing the wheel, you will see the caliper. By using a wrench, you can remove it and examine it. If you see any fuel leakage, you have to replace it.

3. Removing Rotor

Now, remove the rotor by giving high force to the rotor with a hammer and then just pull it off.

4. Opening The Board

To go to the seal, you have to open the pan cover of the board by removing the nuts with the help of a flat head screwdriver.

5. Remove The Cross Pin

Now, you have to rotate the driven shape so that you can easily access the clips of the Gober lock.

Then you have to pull the cross pin of the carrier with the puller machine. To loosen the cross pin you have to apply the force in a clockwise position.

After removing, examine the condition of the cross pin. If it looks defective, change it.

6. Remove The Axle

After removing the cross pin and c-clips, you can remove the axle by pulling with your hand. 

7. Examine The Condition Of The Axle

At the top of the axle, you can see two specific places on the axle. One pathway is for bearing and the other for the seal.

So observe well, if you feel any harsh conditions on the pathway, you have to replace the axle.

8. Removing The Seal

To remove the seal, you need a standard screwdriver. With the help of the screwdriver, remove the seal

9. Setting Of The Seal

Go to the store to buy a seal. And then you have to replace it with the old one. Clean the broad of the seal.

And then put the seal in the whole. Take a piece of wood and a slight hammer. Place the wood on the seal. Just give a decent amount of force on the wood with the slight hammer.

10. Reset The Axle

Instantly, reset the axle into the seal whole. Be aware so that you do not damage the seal. Then adjust all the c-clips and cross pin.

11. Other Settings

Now adjust all other parts that are opened for the procedure. In the last stage, after resetting the wheels, you will get the rear axle seal reinstalled.

Now tell me, do you get your answer on how to replace rear main axle seal Chevy Silverado 1500? We hope you get it.

Section 3: Tips & Tricks

These 4 amazing tips and tricks will help you avoid mistakes and complete the process quickly and easily.

  • At the time of removing the pan cover of the board, the fuel will come out. So be prepared.
  • While removing the cross pin, you should rotate clockwise to downward the driven shaft. It will be upward when you rotate in an anti-clock position.
  • When setting the seal, use grease or gear oil for easy setting.
  • Before resetting the axle, make sure to clean it properly. 

This Video May Help You Too!

Frequently Asked Questions (FAQs)

How do you change a rear axle seal?

You can change the Rear axle seal by removing it and replacing it with a new one. For more details, you should read “How To Change Rear Axle Seal Chevy Silverado 1500? [Be A Pro]”

How do you take the axle seal off a Chevy?

To remove the axle seal, first, you must remove the axle by removing the cross pin and c-clips with a screwdriver. Then you can remove the seal easily.

How much does it cost to have a rear axle seal replaced?

The approximate cost of the replacement of the rear axle seal is around $239 to $292. So it is expensive for sure.


We tell you the whole procedure simply and easily so that you can apply the process by yourself at home.

You know how to change rear axle seal Chevy Silverado 1500. The tricks and advice should make you pro to change the seal.

You Can Also Read:

Similar Posts