Honda Accord CV Axle Problems and Their Causes: Know Before You Face It

If you start having problems with the steering wheel and suspension, your Honda Accord’s CV axle has likely broken down. The axle could also become twisted and deformed.

These Honda Accord CV axle problems could result in your car’s loss of power and handling.

The sections in this article cover the most common problems Honda Accord CV axles encounter and the causes of these problems.

Honda Accord CV Axle Problems

Honda Accord’s CV axle problems can lead the car to hesitate to go faster or change gears. Most Honda Accords are susceptible to this issue. Manual transmissions are more frequently affected.

In a Honda Accord, a CV axle transmission shaft issue can develop for various causes, including poor wheel bearings and worn-out or damaged CV boots.

In addition, the CV joint coming loose, problems with the driveline, or harm to the braking disc rotor and caliper can also cause this problem.

Here is a quick review of all the possible problems-

Problems	Reasons
Poor Wheel Bearings	Poor Maintenance
Worn out CV boots	The heat generated from driving
Loose CV joints	Poor Maintenance
Drivetrain issues	Worn out CV boots or joints
Damaged Braking Disc	Excessive heat

Poor Wheel Bearings

The wheel bearing is a crucial component of the axle on a Honda Accord. They enable the car to move easily and act as a fallback if the transmission or engine fails. They don’t need much attention or maintenance while they’re in good shape. If you neglect them, however, they can seriously affect the suspension, steering, and brakes.

Lack of maintenance is one of the most frequent reasons for poor wheel bearings. The suspension system may eventually get clogged with dirt and debris due to worn or loose wheel bearings.

It will also cause harm to and failure of the other components. Incorrect installation or damage during shipping can cause poorly maintained wheel bearings.

Loud clunking noises when driving, severe wheel vibration, and uneven tire wear indicate a faulty wheel bearing. If you also have trouble turning or stopping the car are all indications of a faulty wheel bearing.

Have a professional look at your wheel bearings as soon as possible if you think one of them might be damaged. It could significantly extend the life of your car and keep it where it belongs—on the road.

Worn Out CV Boots

Many things account for a worn-out CV boot. A common Honda Accord CV axle shaft problem is worn-out CV boots. This problem manifests as a decline in CV performance, increased axle wear and tear, and ultimately failure. These problems, if not addressed, might seriously harm the car and necessitate costly repairs.

The boot may tear due to high friction during fast spins. In addition, driving can generate a lot of heat, which can cause the rubber to age and break. Until it is too late, many drivers fail to recognize the signs of a worn CV boot.

Regular maintenance is the greatest method to keep these issues from occurring. For suggested service intervals, consult your owner’s manual, and make sure your car gets frequent checkups.

Loose CV Joints

Knowing that your Honda Accord’s CV axle may have issues due to a loose CV joint is critical. Power is transferred from the engine to the wheels through the joint. As a result, your car may become immobilized and dangerous to drive if it becomes loose or damaged.

The following symptoms of a loose CV joint include jerky or delayed acceleration. If you also have trouble turning the car, poor steering response, and excessive noise and vibration from the car, you can also have a loose CV joint.

The CV joint becoming loose could be mostly attributed to poor maintenance. High impact incidents and running the car in harsh weather conditions can cause the CV joint to become loose.

Get the car inspected if you see any of these signs as soon as possible to repair your Honda Accord shaft problems.

Faulty Drivetrain

Your Honda Accord CV axle may experience other complications. These complications arise when the car’s drivetrain develops problems.

For example, the CV axle might experience excessive wear and tear. This wear and tear could be due to a defective drivetrain and Honda Accord drive shaft problems, among other issues.

When the drivetrain malfunctions, it makes excessive noise that points to a problem with the driveshaft or gearbox. It can also indicate diminished acceleration and engine power, and your tires might start to wear unevenly.

Worn-out CV joints or CV boots may be the root of a drivetrain problem. As soon as any symptoms arise, you should inspect the drivetrain and replace it if necessary.

Damaged Braking Disc

Another CV axle issue with the Honda Accord is a broken brake disc. Numerous issues might result from it, such as decreased stopping power and complete failure of the braking system. Fortunately, repairing a damaged disc may be done quickly and cheaply.

Several factors may harm the braking system of your Honda Accord CV axle. Excessive heat is one of the most frequent reasons discs become damaged. The brake pads are forced against the disc to create friction and stop the car during normal operation. The discs could distort if the heat produced by friction does not spread efficiently. The disc will no longer function if it becomes warped, and the brake pads will wear out more quickly than usual.

When you use the brakes, a screaming or grinding sound is one of the most evident signs of a broken disc. Additionally, you might find that your automobile still has trouble even when you apply heavy pressure on the brakes. This trouble shows when slowing down.

This May Help You Too!

Frequently Asked Questions (FAQs)

What are the symptoms of a failing CV axle?

Reduced power and torque, jerky motion, and an inability to accelerate or decelerate are signs of a deteriorating CV axle. If the axle is not fixed or replaced, ultimately, a failure could occur that would force the car to halt.

How much does it cost to replace a CV joint on a Honda Accord?

A Honda Accord CV joint replacement typically costs between $1,385 and $1,424. So while parts cost about $1,235, labor cost ranges between $150 and $189.

What does it sound like when a CV axle is going out?

There have been reports of both loud clicks and loud pops. It’s impossible to ignore this noise once you hear it. When you try to turn the car, a worn CV axle will show itself due to its loose joints.

Can you drive with a damaged CV axle?

Driving an automobile with a broken CV may cause the joint to deteriorate, rendering it impossible to move. You won’t be able to control the car, which increases the likelihood of an accident.

Conclusion

It would be impossible to ignore a problem with the CV axle in your Honda Accord. You should take care of it right away and avoid trying to drive the automobile while the Honda Accord CV axle problems are still unresolved.

Engage the services of a car expert to examine it; they will then determine the best course of action and how to proceed with the repair. Your principal focus should always be your safety!

You Can Also Read

M A Susama

Here is our Front-end technician who has worked on hundreds of vehicles of different renowned brands so far. And her 8 years of experiences help her monitor and manage the whole workflow of this website and run the site smoothly. After graduation, she finds her interest in aiding people through her writing offline or online. This interest ignites and inspires her every time to present you with the most effective and secure tips and guides to troubleshoot your car.

Honda Accord CV Axle Problems and Their Causes: Know Before You Face It